How To Use A Motorcycle Jack In 6 Simple Steps For Beginners

Motorcycle owners often prefer fixing the bike themselves to taking it to a workshop or a professional mechanic. Thus, they search the Internet for valuable tips to handle some simple issues. One of the most crucial things bike riders might get hold of is jacking a motorcycle.

How to use a motorcycle jack? This process is not challenging and can be completed in about 15 minutes. This post will provide you with a step-by-step guide. Let’s scroll down for all the necessary information!



What Is A Motorcycle Jack?

Any motorcycle owner needs a motorcycle jack, a straightforward but crucial piece of equipment. It is a compact, portable jack that may be used to raise a motorcycle’s front or back to support the repair process. 


The designs of motorcycle jacks vary, but they always have a few essential characteristics in common:

  • Be sturdy enough to carry a motorcycle’s weight. 
  • Be sufficiently stable to keep the bike from falling over. 
  • Be simple to use so that even inexperienced riders may utilize them. 

A motorcycle rider’s toolbox is incomplete without a motorcycle jack, which might be the difference between a successful repair and a difficult one.

Why should bike owners have one? These are some benefits that this tool can bring us:

  • They make it simpler to do maintenance and repairs since they let you swiftly and simply raise your bike off the ground. It also allows for more clearance underneath for easy fixing.
  • You can also use a motorcycle jack to assist secure your bike while it is being transported. Keep your motorbike high to avoid having other items in the trailer scratch or harm it. 

Thus, using a motorbike jack might ultimately save you time and money. Investing in a quality jack is always a good idea, regardless of whether you use your motorcycle for enjoyment, racing, or commuting.

How To Use A Motorcycle Jack To Jack Up The Motorcycle

1. Prep the Surface

First, you need to find a flat, solid surface where you can put your bike for many hours while doing the repairs. 

Moreover, ensure the surface is high enough for the motorbike’s front wheel to contact it, and its front end should be a bit higher than the back end. This will permit you to balance the motorcycle correctly.

Keep in mind that a floor jack for a motorbike is not the same as a jack for a car. Although the lifting procedure to slowly elevate the motorbike to an upright posture is similar, the two are worlds apart. 

If you don’t have the bike jacks, the ideal method is to turn to wood blocks and ratchet straps.



2. Find The Gravity Center Of Your Motorcycle

Finding the gravity center of a bike is the most complicated step. The center of gravity is the point where all the bike weight can be supported without falling over or tilting.

This point is often discovered by slightly lifting the bike’s front wheel and then gently moving it back and forth to determine exactly where its center is. You should mark this point with a cloth, thread, and chalk to remember. 

Moreover, most sports bikes don’t have a center stand. So you need to use frame rails to put it up as a safety method.

3. Assess The Your Bike’s Underside 

It’s time to look at the bike’s underside once you’ve marked where its center of gravity is. A flat surface is a prerequisite. You must locate the jacking points, which are the spots the bike and jack stands come into contact.

These are often located close to the suspension or engine. Ensure that these points can fit tightly and remain stationary on the metal surface if you’re using a jack stand.

A level surface makes it easier for the motorcycle jack to stay in place by distributing the bike’s weight equally.

4. Set Your Bike’s Position Correctly

Try to adjust the bike position to let it stay upright. Use a plank of wood or similar objects to balance the motorcycle’s back end if it is tilting to one side. The side stand is useless during this process.

Call a buddy for assistance should you find it hard to place a wooden block in the proper location. You may also use ratcheting tie-down straps to secure the motorbike.



5. Put The Floor Jack In A Proper Position 

After the motorcycle is balanced and stable, you can begin setting up the motorbike jack. Ensure it is positioned precisely beneath the bike’s center of gravity and is pointed in the direction of the proper jacking point.

Moreover, you need to fasten the jack with a strap or chain to prevent it from sliding out from beneath your bike when pulling it off the ground.

6. Lift The Motorcycle Slowly 

After positioning everything, carefully raise your bike until it is correctly balanced on top of the floor jack stand or the motorcycle jack stand. 

Before thoroughly securing your vehicle, make sure there is no gap in between and tighten any loose screws and bolts. Put the motorbike up on frame sliders if you can to safeguard the front brake lever and other priceless components.

Take your time and be careful, especially when this is your first time raising your bike. 


Final Thoughts

Knowing how to use a motorcycle jack is essential if you are a motorcycle owner. These tips will help ensure the bike’s safety while lifting it up. Always remember to check the surface before starting the process. 

Be careful in case you are inexperienced. Although the jack is useful and simple, it can become dangerous when not positioned or used correctly. As a result, do not overlook any steps above.

4.7/5 - (13 votes)