How To Ride A Big Motorcycle For Beginners – Detailed Guide

Many riders find it challenging to control a big motorbike, especially in small corners with. If they are novice riders, this is considerably more difficult. 

Although experts recommend choosing a doable one in size, weight, and power when beginning, many motorcyclists defy to start with a hefty motorcycle. 

In this post, we’ll cover the basics of how to ride a big motorcycle for beginners safely. We’ll go over some important tips to keep in mind and provide a detailed guide on what you need to do to get started.


Why Riding A Bigger Motorcycle Will Be More Challenging?

If you are new to riding a motorcycle, it will be an uphill struggle to control a heavy one. Indeed, most beginners have trouble balancing a heavy motorcycle. It could be worse when the bike is larger. This is one of the reasons why all new rider courses use bikes with lower CC engines.

Another crucial issue to take into account is that larger motorcycles are usually more expensive, which increases the rider’s anxiety about hurting the vehicle. Of course, nobody wants to have scratches on their new costly bikes.

Thus, depending on your riding level, you should choose a suitable motorcycle (weight, CC engine, etc.).

A Detailed Instruction: How To Ride A Big Motorcycle For Beginners

Get Familiar With The Controls

The first step of learning to ride a motorcycle is always understanding the ways to speed up and stop. This knowledge is crucial for safety while riding.

You will need to get hold of 5 basic and main controls on motorcycles:

  • Handlebars: 2 bars on the left and right to help you control the direction.
  • Throttle: It is on the right handlebar, used to regulate the motorcycle’s speed. Turn the throttle toward you to accelerate. Twist it away from you to slow down. When you release it, the throttle must fully return to its idle position.
  • Brake lever (front and rear)

In front of the throttle is the front brake lever. To apply the brake to the front wheel, you need to squeeze the lever in the direction of the handgrip.

The rear brake lever is placed in front of the right side foot peg close to the right foot position, used to engage the bike’s rear brake. To operate it, apply pressure to the lever with your right foot.

  • Clutch lever: It is on the left handlebar, aiding in gear shifting and managing the clutch. To engage the clutch, release the lever after squeezing it toward the handgrip. You need to release the clutch before shifting gears. 

Moreover, try synchronizing your clutch and throttle actions to switch gears smoothly.

  • Shift lever: It is close to the left footrest, working to change the transmission’s gears. You should only use it when the clutch is disengaged. You may choose the gear you require by raising or depressing the lever with your foot. 

Get On It

Ride A Big Motorcycle For Beginners

Face the motorbike from its left side to correctly get on it. Your right leg should be extended over the seat when you grab its left handlebar. Remember to place the feet on the ground firmly.

Sitting on a bike and going through the controls before turning it on is the best way to learn how it works.

Take hold of the handlebars, clutch, and brake levers. Make sure you can easily reach them. When holding the handlebars, your arms should have a tiny bend in the elbow. Your fingers should have easy access to switches.

Make sure your feet are not difficult to place on the ground.

Activate The Engine

Push the clutch lever all the way in and find the kill switch. It is often a red switch near the right handlebar. Turn it to the “on” position.

Try “Power Walking” With Your Motorcycle

Don’t try to run immediately! Start to power walk with the bike first.

Put your feet on the ground in front of you to begin. Release the clutch gradually until the bike starts to move ahead on its own.

Walk the bike forward by solely using the clutch while stabilizing it with your feet.

Repeat until you can lift your feet off the ground while maintaining an upright position for the bike. On your bike, you should develop a strong sense of balance.

Practice Shifting Gears

Ride A Big Motorcycle For Beginners 1

Practice shifting after you can ride on a straight path. Becoming familiar with the “friction zone” is crucial. The region of resistance, produced as the clutch engages, is known as the friction zone. This region enables the engine to send power to the back wheels.

Motorcycle gearboxes are sequential, so whether you’re shifting up or down, you must make each gear shift one after the other. To be able to feel and hear when to shift, you’ll need to practice. When it’s time to shift, the engine will begin to rev higher.

Practice Slowing Down And Stopping

Finally, you must know how to slow down and stop your bike after practicing starting and shifting. Keep in mind that the lever operates your front brake on the right handlebar, and the brake of your right foot controls your rear wheel’s brake. 

You should often start braking with the front brake first and then the back brake to stop the motorcycle.

As you can slow down and start braking, apply pressure on the front and rear brakes. Make sure the throttle is not being pulled back. 

Don’t fully engage your brakes because doing so might cause your bike to halt and jolt abruptly. Instead, gradually increase brake pressure.

When you come to a complete stop, maintain the front brake applied and place both of your feet firmly on the ground. 

Bonus Tips To Practice Riding Motorcycles

Stop And Go

Once you have mastered the correct stopping method, you may go on to another exercise that allows you to repeatedly practice this skill until it becomes natural to you when riding.

This exercise, also known as the stop and go, will assist you in creating muscle memory so that each stop is executed correctly.

Keep in mind that our aim is to concentrate on the proper technique. Now that you are using that method repeatedly, it has become a habit.


Another skill you need to master is parking a large bike correctly. When choosing a parking area, beginners should choose one with a flat, smooth, and non-slip surface.

On a level surface, controlling your motorcycle might be simple. If not, you will feel heavier and more difficult to park. 

Since almost all motorcycles are hefty, make sure you park your bike using the side stand rather than the center stand.


Always Keep Your Head Up

Look straight ahead and concentrate on the road when driving slowly in traffic. This way, you may better perceive traffic flow and determine whether to stop or slow down.

Moreover, while you focus more on the road, you can lessen the chance of getting into an accident. Because of the additional weight, braking distance must be maintained when riding.


We hope you enjoyed our article about how to ride a big motorcycle for beginners. It is important to remember that your safety is always a top priority when riding a motorcycle.

Besides these instructions and tips, you also need to wear protective gear to reduce the risks of injuries. Always remember to practice first to get familiar with its controls and heaviness. 

Further Reading:

4.5/5 - (2 votes)