How to Clean Motorcycle Helmet? Complete Guides and Tips

Open face helmet
Washing them is important

Helmets are practical items to keep accident injuries on the road at bay. They also provide robust barriers against street dust and hazardous weather conditions. Yet, unfortunately, many people seem to take them for granted and neglect regular upkeep. This detailed guide will lend the greatest tips on how to clean motorcycle helmet properly.

All these steps require nothing extra – just a little care and attention. Follow them if you wish to preserve your road safety for years to come.

Why Cleaning Helmets Is Important?

All in all, a thorough cleansing process should take care of both the headgear’s outside and inside surfaces. Otherwise, bacteria, bad smells, and material wear are unavoidable.

The helmet’s outer shell and visor are in contact with debris, grime, and dirt on a frequent basis. From rainwater and soil to even insects, it takes in everything! Just one quick glance at some well-used helmets will easily explain why regular cleaning schedules are a must.

External covers are not the only parts subjected to soiling. Even their internal components can get pretty gross, too. After all, they absorb all types of sweat and face moisture during rides. Do you seriously want to leave such a greasy helmet unattended for days – or even weeks? Ew!

How to Clean Motorcycle Helmet? 

Cleaning helmets do not differ much from other types of furniture and appliances. You only need to note down these six simple steps: assemble the right tools, take off the gear accessories, clean the lining, exterior, vents and shields, and then put everything back together.

Step 1. Assemble Essential Cleaning Supplies for Your Headgear

toothbrush toothpaste clean mouth 1350524
Some tools to prepare

For starters, gather all the necessary tools for easier cleansing. A typical box should include:

  • Warm water
  • Toothbrush
  • Non-abrasive and soft cleaner (baby shampoo will be terrific)
  • Microfiber cloth

Many other cleaning products tailored specifically for motorcycles are also available at many retailers and online shops. Still, keep in mind a list of things you should never, ever place near your helmet – or else damages will ensue. Such items entail:

  • Dish soap
  • Ammonia-based cleaners (ex: glass cleaner)
  • Petroleum distillate cleaning products (ex: mineral spirits)
  • Solvent-based cleaners (ex: rubbing alcohol)

Set the headgear in a safe place where no one minds some water splashing – such as a garage or a kitchen. We also suggest you find the helmet manual for more references, as certain steps in these guidelines might call for different operations across varied helmets.

Step 2. Take Off All The Gear Accessories

Remove all accessories or external devices installed on the helmets, such as cameras or speakers. (Certain products, like the Cardo systems, do supply some detailed instructions on safe un-installment). 

For dual-sport or ATV helmets, remember to extract their peaks as well.

Step 3. Uninstall And Clean The Interior Lining

Most modern helmets today feature removable liners. The next step is to pull these cheek pads and liners out of your helmets (always keeping track of their original positions for later re-installment). Then wash everything.

It’s alright to use washing machines on delicate cycles and gentle detergent. You may also wash them manually with soapy and warm water. Once done, let them dry by themselves rather than turn to a dryer.

And what if these liners are unremovable? Then you have no choice but to wash the entire helmet in one go. Pick up a huge tub that can accommodate the whole helmet dimension before mixing baby shampoo and warm water. Dunk the headgear into this mixture for a few minutes, allowing soap and water to penetrate its length.

Finally, use a microfiber towel to scrub and rinse it thoroughly. Let the device air dry on its own.

Step 4. Clean The Helmet’s Exterior 

motorbike helmet motorcycle helm shoei protection gear 1109367
Clean the exterior

Put a damp and warm microfiber handkerchief on the top for about 30 minutes, letting the caked-on gunk loosen. Next, use a second microfiber towel to wipe its exterior gently up and down till no stains remain. Toothbrushes are also a great assistant in this case, whose small tips reach smaller nooks and corners with ease. 

Finally, spread automotive wax over the helmet to preserve its spotless shell in the near future.

Step 5. Clean The Vents, Sun Shields, and Face Shields

Face and sun shields are fouled easily with grime and dirt. Take more time to wipe them in gentle cycles using soft cloths. Never scrub these compartments with abrasive textiles, or the visor might suffer from huge scratches!

Pinlock shields are not a common fixture, yet they are still present in certain headgear models. If your helmet is one of them, do not forget to skim through the maintenance instructions provided by your manufacturers before attempting anything. 

In case of severe clogging issues, one great solution is to give the shields one or two quick blasts with air compressors. Finally, seal the deal with thorough cleaning via cotton swabs.

Step 6. Put Everything Back Together

Put everything back together – How to Clean Motorcycle Helmet

After you finish, reassemble the helmet accessories. Make sure all nooks are dried before this step; no one wants to have accumulated moisture inside their precious headgears!

All in all, the cleaning procedure only takes 1 to 1.5 hours at best. Try to find a free weekday or weekend and get things done. Put on your favorite songs or TV shows to kill time if needed – and you will find yourself with a squeaky-clean helmet in a blink!


1. How Often Should I Clean It?

Though the answer depends on your helmet’s conditions, we still suggest you reboot its shiny gloss after every ride. About once a month, do a thorough cleaning cycle to ensure it always stays spotless.

2. Is It Dishwasher-Safe?

Never do foolish things like submerging your helmets in a dishwasher. Otherwise, the EPS liners can get waterlogged and melted off by the dishwasher’s internal temperature. 

In short, no shortcuts are feasible. Take time to do things manually.


This article has offered excellent and straightforward instructions on how to clean motorcycle helmet. As previously established, few prerequisites are needed – except for the most basic items that you can find in every corner of your kitchen. 

Take time to wash them after every ride (or at least twice or thrice a week if you have no time), which can safeguard your beloved headgear against wear, scratches, and odors. Feel free to reach out for more help in any case.

Further Reading:

4.4/5 - (5 votes)